Batscan logo
login
Batscan – Advanced Battery Monitoring
gt-Flagsv-Flagen-Flagpl-Flagzh-Flag

Search at batscan.se
google

Voltage module

The Batscan Voltage Module measures individual Block or Cell voltages in the batteries via a protective resistor.

  • 2-port RS485 bus interface to Batscan Network.
  • 4kV/6kV isolation test voltage.
  • For use with up to 500V/800V total battery voltage.
  • Dual processor advanced DSP technology.
  • +-20VDC input voltage range on each channel.
  • 8 input channels from the protective resistor on the battery terminals.
Model Number: BA673, BA673-HV (max 500V, 800V battery voltage)



RP2M Protective Resistor
The Batscan Protective Resistors are used on all connections to the battery terminals to protect against electrical shock and short circuits.
  • 2MΩ +-0.5% resistance.
  • 10kV over voltage pulse capability.
  • 6.3mm (1/4") FAST-ON female connector to the battery terminal.
  • Crimp spice for measuring wire, area 0.2-0.5mm2.

Model Number: RP2M-08 (length: 80mm, standard)
Model Number: RP2M-20 (length: 200mm)



BA672-CT - Current Module.
 


RP2M Protective resistor.