|
The Batscan Voltage Module measures individual Block or Cell voltages in
the batteries via a protective resistors.
- 2-port RS485 bus interface to Batscan Network.
- 4kV/6kV isolation test voltage.
- For use with up to 500V/800V total battery voltage.
- Dual processor advanced DSP technology.
- +-20VDC input voltage range on each channel.
- 8 input channels from protective resistor on battery terminals.
Model Number: BA673, BA673-HV (max 500V, 800V battery voltage)
RP2M Protective Resistor
The Batscan Protective Resistors are used on all connections to the battery
terminals to protect against electrical chock and short circuits.
- 2MΩ +-0.5% resistance.
- 10kV over voltage pulse capability.
- 6.3mm (1/4") FAST-ON female connector to battery terminal.
- crimp spice for measuring wire, area 0.2-0.5mm2.
Model Number: RP2M-08 (lenght: 80mm, standard)
Model Number: RP2M-20 (lenght: 200mm)
|
BA672-CT - Current Module.
RP2M Protective resistor.
|
